采用模数转换技术提高脉冲激光测距的测时精度

针对脉冲激光测距中计数量化误差影响测时精度的问题,本文提出了采用模数转换技术提高测时精度的方法,并进行了可行性与精度分析,理论与实践结果均表明,该方法易于实现,能够容易地将计数量化误差减少若干个数量级。     

FATIGUE CRACK GROWTH UNDER MODE II LOADING

Abstract— The behavior of fatigue crack growth for low and medium carbon steels, an austenitic stainless steel and an aluminum alloy under pure Mode II loading was investigated experimentally, using cruciform specimens. The results show that under pure Mode II loading, fatigue crack propagation has three possibilities, namely, bifurcation into two branches, propagation along the original Mode II direction, and the mixture of these two situations, depending on the material. The growth rate da/dN vs. ΔK_II relation for Mode II propagation is similar to a Pans type law for Mode I growth. Fractographic observations by optical microscopy and SEM were made also on all specimens tested. When a crack branched, striations parallel to the crack front which were often associated with Mode I fatigue crack growth were observed and long marks parallel to the crack propagation direction were also found for slanted fracture surfaces. When a crack propagated along the original Mode II direction, many frictional marks parallel to the crack propagation direction were observed.     

神经网络分类器的快速构造算法

使用ＢＰ算法训练多层网络的速度很慢而且事先难于确定隐节点和隐层的适当数目。本文提出一个有效的算法，先构造决策树，然后将构造的决策树转换为神经网。文中使用一个全局准则函数控制决策树的增长，它较好地匹配了树的复杂性和训练样本量及错分率界。实验结果，本文的算法比用ＢＰ算法训练多层网络要快，而其分类精度不低于用ＢＰ算法训练的多层神经网。     

智能控制的理论和方法

本文简要地回顾了智能控制的发展过程，讨论了智能控制的几个主要理论与方法，最后对智能控制的发展提出了作者的看法。     

新型重整催化剂的研究——Pt／L中沸石酸碱性的作用

Ｐｔ／ＫＬ、Ｐｔ／ＢａＫＬ及Ｐｔ／ＨＬ上的铂与沸石的酸碱位发生相互作用，导致催化剂上存在不同电子状态和粒度分布的铂位，从而产生有着完全不同催化作用、不同抗硫性能的两类催化剂，即以碱性沸石为载体的“单功能”催化剂和以酸性沸石为载体的“双功能”催化剂。在Ｐｔ／ＫＬ、Ｐｔ／ＢａＫＬ催化剂上，存在着对硫敏感的具有环化脱氢功能和对硫不敏感的仅具有脱氢功能的两类铂活性位。     

Modeling electromigration lifetime under bidirectional currentstress

Electromigration reliability of interconnect under bidirectional current stress has been studied in a wide frequency range (mHz to 200 MHz). Experimental results show that the AC lifetime rises with the stress current frequency. The current density exponent and the activation energy of AC lifetime are found to be twice that of DC lifetime. Pure AC current stress failure at extremely high current density is believed to result from thermal migration of metal at hot/cold transition points     

[NZP]陶瓷零膨胀性能的设计

研究了「ＮＺＰ」材料的零膨胀性能，并尝试对零膨胀的「ＮＺＰ」陶瓷作了设计，从晶体结构、原子复合、各向异性、显微结构和复合材料等方面提出了设计思路。     

Mathematical simulation and experimental verification of melting resulting from the coupled effect of natural convection and exothermic heat of mixing

When melting processes are associated with an exothermic heat of mixing, unique coupled transport phenomena take place. In this article, a mathematical model has been developed to simulate these unique coupled heat and mass transfer events. The model was based on the control-volume finite difference approach and on an enthalpy method. In order to verify the mathematical model, a low-temperature physical model was established consisting of ice and sulfuric acid solutions. In this physical model, both temperature and velocity measurements were carried out. The model predictions were compared with experimental measurements, and they were found to be in good agreement. The model was also applied to a high-temperature system, namely, the melting of silicon metal in liquid high carbon iron. The predictions distinguished two periods present in the entire melting process. In the first period, the silicon was heated up. The second period, i.e., free melting period, occurred in tandem with the exothermic reaction, and consequently, the melting process was greatly accelerated. As was the case with the low-temperature physical model, as with the high-temperature system, good agreement was obtained between the predicted results and the experimental measurements.     

用迁移率和载流子浓度研究碲镉汞中的深能级

获得了一种研究碲镉汞深能级的方法。通过分析迁移率 载子浓度与温度的关系，可以得到关于深能级的重要依据。     

络合沉淀法制备BaTiO_3超细粉末

在分析ＢａＴｉＯ_３前驱体形成机理的基础上，提出了以草酸作为络合剂，用络合沉淀法制备超细ＢａＴｉＯ_３新工艺。用化学分析法测定产物Ｂａ／Ｔｉ比，用ＸＲＤ、ＴＥＭ、ＢＩ－９０激光散射粒度仪对产物的晶型、粒度及形貌进行表征。结果表明：采用该法合成的前驱体，微观组分确定，粒径小，粒度分布窄，近似球形，煅烧后为高纯超细ＢａＴｉＯ_３粉末。